Ultimate Guide for Priming a Water Pump

If you own a water pump or other pumps in Australia, then you should be aware of the responsibilities, safety guidelines and maintenance routines to keep your equipment in safe and good working condition. You have to read and understand the user’s manual to learn how the pump is used and familiarise the different controls and how they operate.

Steps in Priming a Water Pump

Water pumps may stop working if they run out of pressure. This usually occurs when they are shut down for an extensive period of time. Some of you might have experienced this and you can probably attest that this is just a temporary problem. So, to allow the water pump to work again, all you have to do is to prime or flush water back into the pump to produce enough pressure that will enable it to operate again.

If you have no idea on how to prime a water pump, then you can follow the basic steps below:

1. Turn off the pump’s electrical power. Allowing the pump to run without sufficient water circulation in the system may burn the motor.

2. Find a plumbing fixture that can be connected to the pump system.

3. Use a garden hose that has a separate water source and flush it to remove any dirt and particles that have accumulated.

4. Open the relief valves on the pump structure.

5. Place or attach the hose to the plumbing fixture, then turn on the water. When you see water coming out of the fixture, close the faucet.

6. Wait and listen for the water to enter the tank. If your tank has a water pressure gauge, then you can see the water pressure rise as the water goes into the tank. When water stops flowing, it means that the system has been pressurised.

7. Stop the water to the hose and turn on the pump.

8. Test the operation of the water pump and allow it to run for about a minute.

9. If the pump turns off after the pumping cycle, then you have successfully primed your pump.

10. If the pump continues running, then you have to check the tank, pump and water pressure gauge. You may also have to repeat the steps in this procedure.

Pump Solutions Australasia: Providing You with Durable Pumps and Superb Services

Now, if you need pumps for your home or business, then choose a reliable company who can cater to your needs. Pump Solutions Australasia has built its reputation through dedication and hard work. With our many years of experience, we have gained expertise in manufacturing and repairing pumps in Australia. Our professional team consists of proficient individuals who are committed to producing top-quality outputs and satisfying our clients. So for any queries regarding vacuum pumps, submersible pumps and water pumps, you know who to call. What are you waiting for? Pick up your phone for we will be waiting.

How to Choose a Repair Company for Vacuum Pumps in Australia

When you purchase something, you certainly want to get the best value for your money. You would also want for the item to last a lifetime, but whether you like it or not, damages due to wear and tear are inevitable. So before purchasing a product, such as vacuum pumps in Australia, it is essential that you check for the product’s warranty. However, this may not last very long.

What to Look for in a Repair Company

A vacuum pump is a bit costly so if ever it encounters a problem, it is best to seek a professional repair company to ensure that no further damages will be inflicted. Besides, you have invested your money into the pump so caution should definitely be observed.

People these days are fortunate because repair services are available in case something happens to your pumps in Australia. The only predicament that you have to face is choosing the right repair company for the job.

So, here are some tips that can help you decide:

• The company should have a record of the pump parts so as not to waste time in searching for the necessary components needed for the repair.

• Make sure that communication lines between you and the contractor are open.  A good company will call and ask you about your specifications and they will update you on your options.

• Check the company’s portfolio of their recent services. Checking other clients’ testimonials can help as well.

• A team who listens to your needs is a shoo-in for they can customise to meet your requirements, whether you are looking for new pumps or just a replacement.

• Make certain that the team that you will hire are experienced, reliable, professional and skilled.  You would not want your investment go to waste, do you?

• And of course, great customer service is a must. Clients are the foundation of a business so proper treatment is important. It is also nice to deal with accommodating staff who are willing to listen and deliver.

Pumps Solutions Australasia: Reliable Repair Services

Now, if you want to buy pumps in Australia that are resilient and cost-effective, then you should find a reputable company that offers such. Pumps Solutions Australasia has made a name in the pump industry. Our team consists of dedicated, efficient and well-trained professionals who aim to provide our clients with not just high-quality pumps, but superb services as well.

4 Reasons Why Submersible Pumps are Better than Jet Pumps

Can you imagine yourself residing in a far-flung area where water is almost impossible to obtain? You probably do not think about it that much since water can be easily accessed from where you are living. In the remote areas, water wells are constructed in the communities or in individual homes for people to draw water from. The residents also make use of an electromechanical system, wherein a water pump is the centre of the system, and the most common types are submersible pumps and jet pumps.

Submersible Pumps Vs Jet Pumps

The jet pump and submersible pump are both utilised to extract water from a well but their pumping mechanisms differ. The jet pump can be used for shallow and deep wells and it is mounted above the well. This water pump draws water by means of suction, produced by the impeller and diffuser.

On the other hand, submersible pumps are immersed under water near the bottom of the well. These pumps in Australia use their existing pressure to force water out of the surface and be able to provide water for homes and businesses. Now, people often face a dilemma on which pump is a better option for water wells. Here are some points that can help you make up your mind:

• Jet pumps can function in wells deeper than 25 feet but they are most commonly used in shallow water sources. Conversely, submersible pumps can operate efficiently regardless of the depth of the water well. The pump’s long cylindrical shape is ideal as it absolutely fits the well casing and the impellers and diffuser make the pumping mechanism more effective.

• You can save time with submersible pumps since they are self-primed. A jet pump needs to be primed every now and then because water needs to get in the pump without any air and this task can be quite complicated. But with a submersible pump, continuous operation is expected immediately after the pump is submerged under water.

• Submersible pumps make 30% more pressure than jet pumps, which means that more energy can be saved. Also, since it is located near the bottom of the well, a submersible pump does not have to struggle against gravity and atmospheric pressure, keeping workload lighter.

• A submersible pump consists of a sealed motor and pump. Thus, it does not need any maintenance, allowing you to save money. Well, jet pumps do not have a sealed motor so they are susceptible to corrosion and other damages.

Where to Find Reliable Submersible Well Pumps

So, when looking for submersible pumps, vacuum pumps and water pumps, choose a company that offers first-rate pumps in Australia. Pumps Solutions Australasia is recognized not only for its durable pumps, but for the exceptional performance of the company’s pump professionals as well. Now, what are you waiting for? Check our website and get more information.

Pumps in Australia becoming the Fish Hobbyist’s Best Friend

For fish hobbyists and enthusiasts, rearing fish is not that easy, it requires a lot of patience and hard work. If one chooses to place his fish in a fish pond, then the responsibility does not end with the selection of the pond site. Equipment, such as water pumps, must be taken into consideration to ensure that the fish will grow healthy and well.

Importance of Pond Pumps in Australia

Pond pumps play a crucial role in the cleanliness of the fish pond and in keeping the water fresh. Without the appropriate pump, one may face the following problems:

• Harmful microorganisms. Without a pond pump, the water may become stagnant, making it easier for the microorganisms to flourish. One of the most common problems is the emergence of algae. These are microscopic organisms that may build up in the pond which can be potentially deadly since it competes with the fish for the nutrients found in the water.

• Dirty water. Dirty water can be caused by decomposition of organic wastes such as leaves, plants, fish wastes, dead insects and other rubbish can result to polluted water.

• Fish kills. This problem can be caused by the factors mentioned above as the oxygen consumption of the fish can be compromised.

How to Choose the Appropriate Pond Pump

Now, how can one determine which pump is appropriate for one’s pond? Well, pumps are available in different models and sizes that can suit your needs. Here are some tips that can assist you in choosing your pond pump:

• Ponds pumps can either be submersible or external. If you have a small pond, then a submersible pump is more cost-effective and practical.

• Take note of your pond’s size and the volume of water it will hold to prevent low oxygen concentration, improper filtration and stagnant water.

• You should also be aware of the total dynamic head pressure of the pump, which is the total force that is sent back to the pump during the pumping process.

Now that you know the significance of pond pumps, making a decision will be easier. So for resilient and sturdy pumps, get in touch with the unswerving and reputable team of pump professionals in Australia now. Do not hesitate to drop them a line and let them know about what you are looking for.

Jet pumps, centrifugal pumps, submersible pumps, speck pumps—name it; they have it. With their vast collection of pumps in Australia, you will surely pick the right one for you.

Variable Applications of High-powered Water Pumps

There are quite a lot of applications where high-powered water pumps can be used. Operations where high-capacity pumping systems are needed to be able to pump hundreds of gallons of water in an hour can be easily addressed by this type of pumps. Here are some the common applications for high-powered pumps and their advantages compared to other types available today.

For Industrial Farming

Industrial farming involves thousands of acres stretch of crops, and most of these farms are located in remote areas where water supply is usually scarce. The soil on these farms is generally fertile, and it is very economical to use water pumps for better irrigation and ensure regular supply of water for larger vegetation.

Big scale farming involves the use of long and complex piping systems which are built in a variety of configurations. Stations with tanks are built to hold huge amounts of water, and long pipes are set parallel to the row of crops. These stations pump water through high-powered engines to water the crops in a form of spray.

Cattle Farms

Cattle farms are also usually situated in remote areas, usually in desert areas called prairies. These areas are very fertile, and have lots of vegetation, perfect for raising livestock. Water sources in such areas are available from underground creeks and streams and from mountain run off. Cattle growers use high-powered water pumps to pump ample water supply for livestock in such a massive area.

EMS and Medical Cleanups

EMS medical activities provide solutions for problems during power interruption, absence of electrical power source, or even in providing fresh drinking water in the middle of a medical clean-up. When calamities and disaster strikes, trained professionals readily provide assistance, and most often than not, they use high-powered machines to remedy the problems, such as providing light and running water for affected families.

Sewage Treatment

Nine out of ten, these water treatment facilities are far removed from the town to reduce the risks should adverse situations occur. Continuous operations in facilities like this are very crucial, that is why high-powered pump stations are used as back-up power systems.

Remote areas are not the only places that need high-powered water pumps. Even big cities need that extra boost in order to provide high-powered pressure in pumping stations and push water from reservoirs to reach every residence of each community. In cases like this, much work is done with high-powered water pumps.

In order to get the best pump solutions for your every specific pumping need, consult with an expert manufacturer and distributor of quality water pumps. You can either browse through their website for a more detailed version of their functionality, or you can give them a call. 

Basic Functions of Different Types of Pumps

Water pump is important for home use, industrial applications, and building construction by to supplying water coming from underground. Each type of water pump function according to required pumping needs. The pumps are also categorised by its varied application considering that some types of pumps are designed to function for a number of purposes, all of which are available in the market today. 

Water Well Pumps

Water well pumps are the most simple, common and traditional type of pump that provides water for households and large buildings. The pump simply sucks water from an underground supply, and the amount of water it pumps per minute depends on the actual volume of water needed. Number of kitchens and bathrooms for household use for instance, are taken into account to determine the water requirement. 

A bigger amount of force is generally required in order to push enough water up on elevated areas. That is why, for taller establishments and high-rise buildings, pressure tanks are used along side with water well pumps to ensure that the right pressure can supplement the right amount of water needed.

Sump Pumps

A sump pump is used to dewater flooded homes and basements. This type of pump is ideal for draining water out of low-lying areas.

Submersible Pumps

This is an electrical type of pump that comes with an airtight seal. It is also referred to as utility pump, one of the most widely used in the market today. It can drain or empty water and are considered to be more efficient than jet pumps. This pump is commonly used in agricultural and domestic use. Specific types of submersible pumps are also used for specific purposes such as aeration, dewatering, slurs, and sewages.

Swimming Pool Pump

This is called the heart of the pool’s water circulation. This pump works hand in hand with its filters (or even heaters) to keep the pool clean and warm. The power of this pump must match to the size of the pool in order to function effectively.

Vacuum Pumps 

Vacuum pumps are the most versatile type of pumps available in the market today. As a matter of fact, you can readily use it for your home improvement needs and any other projects you plan to work on. Some can be used for cleaning carpets and rugs, including trash compactors.

Like any other types of pumps in the market, there are specific types of vacuum pumps tailor-made for specific purposes. Piston vacuum pump for example, are more affordable than most of its types, while rotary vane pumps are one of the most readily accessible and widely used today.

For your various pumping needs, there are a number of reputable distributors of top-quality material and highly efficient types of water pumps. They offer the best pump solutions through their wide selection of different types of water pumps. They also offer post-purchase maintenance and installation services. Call them up now or visit their website for a more comprehensive detail.