Ultimate Guide for Priming a Water Pump

If you own a water pump or other pumps in Australia, then you should be aware of the responsibilities, safety guidelines and maintenance routines to keep your equipment in safe and good working condition. You have to read and understand the user’s manual to learn how the pump is used and familiarise the different controls and how they operate.

Steps in Priming a Water Pump

Water pumps may stop working if they run out of pressure. This usually occurs when they are shut down for an extensive period of time. Some of you might have experienced this and you can probably attest that this is just a temporary problem. So, to allow the water pump to work again, all you have to do is to prime or flush water back into the pump to produce enough pressure that will enable it to operate again.

If you have no idea on how to prime a water pump, then you can follow the basic steps below:

1. Turn off the pump’s electrical power. Allowing the pump to run without sufficient water circulation in the system may burn the motor.

2. Find a plumbing fixture that can be connected to the pump system.

3. Use a garden hose that has a separate water source and flush it to remove any dirt and particles that have accumulated.

4. Open the relief valves on the pump structure.

5. Place or attach the hose to the plumbing fixture, then turn on the water. When you see water coming out of the fixture, close the faucet.

6. Wait and listen for the water to enter the tank. If your tank has a water pressure gauge, then you can see the water pressure rise as the water goes into the tank. When water stops flowing, it means that the system has been pressurised.

7. Stop the water to the hose and turn on the pump.

8. Test the operation of the water pump and allow it to run for about a minute.

9. If the pump turns off after the pumping cycle, then you have successfully primed your pump.

10. If the pump continues running, then you have to check the tank, pump and water pressure gauge. You may also have to repeat the steps in this procedure.

Pump Solutions Australasia: Providing You with Durable Pumps and Superb Services

Now, if you need pumps for your home or business, then choose a reliable company who can cater to your needs. Pump Solutions Australasia has built its reputation through dedication and hard work. With our many years of experience, we have gained expertise in manufacturing and repairing pumps in Australia. Our professional team consists of proficient individuals who are committed to producing top-quality outputs and satisfying our clients. So for any queries regarding vacuum pumps, submersible pumps and water pumps, you know who to call. What are you waiting for? Pick up your phone for we will be waiting.

How to Choose a Repair Company for Vacuum Pumps in Australia

When you purchase something, you certainly want to get the best value for your money. You would also want for the item to last a lifetime, but whether you like it or not, damages due to wear and tear are inevitable. So before purchasing a product, such as vacuum pumps in Australia, it is essential that you check for the product’s warranty. However, this may not last very long.

What to Look for in a Repair Company

A vacuum pump is a bit costly so if ever it encounters a problem, it is best to seek a professional repair company to ensure that no further damages will be inflicted. Besides, you have invested your money into the pump so caution should definitely be observed.

People these days are fortunate because repair services are available in case something happens to your pumps in Australia. The only predicament that you have to face is choosing the right repair company for the job.

So, here are some tips that can help you decide:

• The company should have a record of the pump parts so as not to waste time in searching for the necessary components needed for the repair.

• Make sure that communication lines between you and the contractor are open.  A good company will call and ask you about your specifications and they will update you on your options.

• Check the company’s portfolio of their recent services. Checking other clients’ testimonials can help as well.

• A team who listens to your needs is a shoo-in for they can customise to meet your requirements, whether you are looking for new pumps or just a replacement.

• Make certain that the team that you will hire are experienced, reliable, professional and skilled.  You would not want your investment go to waste, do you?

• And of course, great customer service is a must. Clients are the foundation of a business so proper treatment is important. It is also nice to deal with accommodating staff who are willing to listen and deliver.

Pumps Solutions Australasia: Reliable Repair Services

Now, if you want to buy pumps in Australia that are resilient and cost-effective, then you should find a reputable company that offers such. Pumps Solutions Australasia has made a name in the pump industry. Our team consists of dedicated, efficient and well-trained professionals who aim to provide our clients with not just high-quality pumps, but superb services as well.

4 Reasons Why Submersible Pumps are Better than Jet Pumps

Can you imagine yourself residing in a far-flung area where water is almost impossible to obtain? You probably do not think about it that much since water can be easily accessed from where you are living. In the remote areas, water wells are constructed in the communities or in individual homes for people to draw water from. The residents also make use of an electromechanical system, wherein a water pump is the centre of the system, and the most common types are submersible pumps and jet pumps.

Submersible Pumps Vs Jet Pumps

The jet pump and submersible pump are both utilised to extract water from a well but their pumping mechanisms differ. The jet pump can be used for shallow and deep wells and it is mounted above the well. This water pump draws water by means of suction, produced by the impeller and diffuser.

On the other hand, submersible pumps are immersed under water near the bottom of the well. These pumps in Australia use their existing pressure to force water out of the surface and be able to provide water for homes and businesses. Now, people often face a dilemma on which pump is a better option for water wells. Here are some points that can help you make up your mind:

• Jet pumps can function in wells deeper than 25 feet but they are most commonly used in shallow water sources. Conversely, submersible pumps can operate efficiently regardless of the depth of the water well. The pump’s long cylindrical shape is ideal as it absolutely fits the well casing and the impellers and diffuser make the pumping mechanism more effective.

• You can save time with submersible pumps since they are self-primed. A jet pump needs to be primed every now and then because water needs to get in the pump without any air and this task can be quite complicated. But with a submersible pump, continuous operation is expected immediately after the pump is submerged under water.

• Submersible pumps make 30% more pressure than jet pumps, which means that more energy can be saved. Also, since it is located near the bottom of the well, a submersible pump does not have to struggle against gravity and atmospheric pressure, keeping workload lighter.

• A submersible pump consists of a sealed motor and pump. Thus, it does not need any maintenance, allowing you to save money. Well, jet pumps do not have a sealed motor so they are susceptible to corrosion and other damages.

Where to Find Reliable Submersible Well Pumps

So, when looking for submersible pumps, vacuum pumps and water pumps, choose a company that offers first-rate pumps in Australia. Pumps Solutions Australasia is recognized not only for its durable pumps, but for the exceptional performance of the company’s pump professionals as well. Now, what are you waiting for? Check our website and get more information.