Monday, June 11, 2012

Ultimate Guide for Maintaining a Swimming Pool Water Pump

Who does not love to swim? Well, it is one of the most effective ways to refresh oneself especially during the hot summer days. Wouldn't it be even better to have a swimming pool on your own backyard? Having a pool does not only require exquisite design, there are numerous factors to be thought of, like the water pumps, filters, skimmers and water treatment system.

Now, a pool pump is definitely essential as it aids in the water circulation to keep it clean. It moves dirt particles and scum to the filters and makes the water fresh again. As time passes by, the pump may experience problems and break down.

Common Water Pump Problems

One of the responsibilities of pool owners is to check on their water pumps periodically to ensure optimal functioning. However, due to wear and tear and other factors, the equipment may become impaired. Here are some problems one may encounter:

Water Leakage. If water seeps out from the pump, it means that there is something wrong. This problem is commonly caused by bad sealant, weak shaft seal or broken impeller. If water leakage does occur, the water pump should be repaired immediately.

Noise. This is certainly one of the most irritating pump problems. This may be caused by blockage, cavitation or overload.

Air sucking. Water pumps are not supposed to suck air. When they do, circulation problems may occur. This is commonly caused by bad sealant, leaks and breaks in plumbing.

How to Repair a Swimming Pool Pump

You may find the following steps helpful if ever you experience pump problems:

1. Assess the power source if it is functioning and check wirings for any signs of decay.

2. Switch the pump off and check the impeller for any debris and dirt particles.

3. Clean the filter if the pump’s performance has reduced and check the skimmer basket for fragments and wastes that may have clogged the system.

4. If the water is taking in air, then raise the water level of the pool. Also, make sure that the O-ring of the pump lid is well-lubricated.

5. Check the wiring and appropriate voltage of the pump for these may have been overlooked. Assess also the vents for blockage.

So, if you are looking for a water pump for your swimming pool or if you are in need of professionals to repair your pumps in Australia, then check the website of the most reliable company now. With their expertise and experience, no problem will be left unsolved.

4 comments:

  1. nice tips for Repair a Swimming Pool Pump by reading these anyone can solve the basic problems of their pool pumps sure.

    ReplyDelete
  2. Thanks for sharing with us. Shenovac Engineers are reputed design, manufacturers and exporters of Pumps- Oil sealed Rotary High vacuum pump, vacuum pressure pump, Suction pump, water ring Vacuum pumps, Diaphragm Vacuum pressure pump, Chemical processing Pump, vacuum components and accessories. Shenovac Engineers are known for there efficiency, Prompt business ethics, High quality and unmatched support acknowledged as leaders of Vacuum Technology. Water ring type vacuum pump

    ReplyDelete
  3. I always prefer to read the quality content and I found your post a good attempt. Thanks for your guidelines.

    Drain systems pumps

    ReplyDelete
  4. Nice blog post If you are searching for the quality Inflatable SUP Boards The modern expansive boats typically have a solid hull and rigid floor additionally. The external form of the boat’s hull permits it to chop through ocean waves simply, that create a sailing more well-off after you travel quicker in rough conditions. This rigid hull structure provides an honest location for AN outboard, and it will support even a awfully powerful outboard engine additionally as a powerful inboard engine. As way as their size, it varies from little rubber dinghies to massive boats of up to fifteen m long, that embrace full cabins and numerous luxury options.

    ReplyDelete